How to engrave wooden tankards

How to engrave wooden tankards

Posted Posted in How to, Other, Wood

Customers request all sorts of weird and wonderful commissions. Customers have lovely ideas to personalise gifts that are only limited by their imaginations, so no two jobs are ever the same.

A customer approached us to ask if we could engrave a pair of matching wooden tankards. He’d commissioned them as gifts for friends for their festival themed wedding or ‘wedfest’. If possible, he wanted to personalise them to make them extra special. Perhaps they would become family heirlooms to be treasured for years to come.

Engraving cylindrical objects

It is possible to engrave cylindrical objects, but this has its challenges. The laser needs a flat surface to focus on for best results. If the laser beam loses focus, engraving quality suffers and becomes fuzzier. The more out of focus the beam becomes, the worse the effect is.

We suggested that for something a little different and to maximise the chances of success, we could engrave the tankards vertically. This tactic would allow the laser to focus on the relatively flat spine of the cylinder. It worked a treat and you can see the results in the photo.

Top tips for engraving cylinders

We used our 100mm focal length lens to compensate for the slight curve on the circumference of the tankards. We performed a nice deep raster engrave to give a 3D effect on them, and the look really suited the chunky tankards. My customer was delighted with the results.

branding stainless steel cocktail keys

Branding stainless steel cocktail keys

Posted Posted in Artwork, Corporate, Other, Stainless steel, Thermark

We’ve been branding stainless steel cocktail keys for Panch Drinks recently. They’re made in three sections for measuring fixed amounts of sweet, sour and strong ingredients, allowing cocktail recipes from mojitos to Moscow mules to be mixed to perfection every time.

These measures are made from stainless steel. Our laser can engrave some types of metal, and stainless steel usually gives good results. We had to use Thermark metal marking paste as the laser can’t engrave the metal directly.

Small logos

The circular bases of the cocktail keys are only 50mm in diameter, which means that logos must be small to fit the space. As a rule, the smaller the logo is made, the harder it is to reproduce the fine detail when engraving it. Thick lines become thin, and fine detail that would look great on a large scale becomes almost indiscernible when scaled down to a few centimetres wide. In this case, we had to remove all the detail apart from the text, and even then I had to engrave some samples to make sure I could get good engraving results.

How does Thermark work?

Thermark is a mixture of pigment and glass particles. When the laser engraves it, it melts the glass and traps the pigment onto the metal surface, forming an enamel finish for a durable, weatherproof mark. Perfect for using in bars!